Ever Extruder Density Control System


A valve to control cook, density, and SME with a bypass at the end of the extruder. 

  • Make small adjustments in SME with adjustable valve 

  • Increase safety of operator with pressure discharge before die 

  • Improve downstream sanitation with bypass of
    startup waste 


“The SSDS and Valve System Ever Extruder provided our plant has greatly improved the flexibility of the extrusion process! From the standpoint of control, the “on the fly” adjustment allows us to fine-tune the products we make with the extruder running, and helps us deal with inconsistencies in raw ingredients. It has also resulted in less downtime that used to occur when we had to add or removed plugs from the die to hit densities. In regards to the safety details, the operators love being able to relieve steam and pressure from behind the die before they remove it.”

Ever Extruder Density Control System - client testimonial


The SSDS system is designed for single screw extruders and some twin screw extruders. It is compatible with Wenger X165, X175, X185, and X235, and ExtruTech E750, E750XL, and E925.

The SSDS will add 140 mm – 160 mm to the end of the last barrel.

Yes, the SSDS is able to configure to any extrusion automation or run without automation.

Ready to get started?

Let’s Get in Touch

We are here to help guide you. 

7 Goodwin Drive | Festus, MO 63028 USA | Phone: +1.636.937.8830 | Fax: +1.636.937.3386 | ISO 9001 Certificate