Ever Extruder Stabilization System


STABILIZATION SYSTEM

An easily accessible and adjustable system to center the barrels and shaft at the end of the extruder.

  • Easily set shaft, screws, and barrel to central alignment position

  • Eliminate metal-on-metal wear between screws and liners 

  • Increase efficiency of motor and pumping of extruder

CLIENT
TESTIMONIAL

“With the Ever Extruder Shaft Support, we are able to re-center our extruder shaft every two weeks to maintain the stability and performance of our extruder without any extra downtime.”

Ever Extruder Stabilization System - client testimonial

STOP THE KNOCK

Give Your Extruder the Support it Needs

Ever Extruder Carbide Shaft Support Pins - part lifetime in hours

F.A.Q.

The stabilization system is for single screw extruders only. It is compatible with Wenger X165, X185 and X235 and ExtruTech E750, E750XL, and E925.

The shaft support will add 60 mm – 80 mm to the extruder at the end of the barrels.

The system comes with an alignment tool to ensure the extruder shaft and screws are always in the center of the barrels.

7 Goodwin Drive | Festus, MO 63028 USA | Phone: +1.636.937.8830 | Fax: +1.636.937.3386 | ISO 9001 Certificate